Raspberry Pi CamJam EduKit 2 - Sensors - Part 1 Worksheets 1 and 2

CamJam EduKit 2 kit contents

Kit Contents:

• 1 x Breadboard
• 1 x Immersible temperature Sensor
• 1 x PIR Sensor
• 1 x LDR
• 1 x Active Buzzer
• 1 x Red 10mm LED
• 1 x Blue 10mm LED
• 1 x 4.7K Resistor
• 2 x 330 Resistor
• 10 x M/F Jumper Wires (Red)
• 4 x M/M Jumper Wires (Green)

LINKS:

Cambridge Raspberry Jam: http://camjam.me/
Can be bought from The Pi Hut: https://thepihut.com/collections/camjam-edukit/products/camjam-edukit-2-sensors
Code: https://github.com/CamJam-EduKit/EduKit2

Worksheet 1:

This worksheet covers setting up the Raspberry Pi, so you can do all the worksheets. This time also had to add a line to the boot/config.txt file, so you can use the Immersible temperature Sensor.

Worksheet 2: LEDBuzz

Diagram and what it actually looked like.

LEDBuzz; this programme turns the LEDs and the buzzer on for one second, and prints 'Lights and sound on' on to the screen,  then turns LEDs and Buzzer off, then prints 'Lights and sound off' onto screen.